Table of Contents
AI in mining is used at each stage of the value chain: prospectivity models rank where to explore, sensors and models classify ore and waste at the face, autonomous trucks and condition monitoring run the fleet, and soft sensors and froth cameras steer the concentrator. The best starting point is a decision made often, with data you already have.
Key takeaways
- In exploration, machine learning ranks ground by its likelihood of hosting a deposit. In one USGS co-authored study, the best models reduced the search space by more than 94% (Lawley et al., 2022).
- At the face, sensors in the shovel bucket can classify material one bucket at a time instead of one block at a time (Haest et al., AusIMM).
- Autonomous haulage is mature: Komatsu commissioned its 1,000th autonomous ultra-class truck in April 2026 (Komatsu).
- In the plant, crushing and grinding typically account for 25% of mining's final energy consumption, which makes them a natural target for optimisation (AusIMM).
- AI supports geologists and engineers; it does not sign reports. Public resource reporting still rests on a Competent Person (JORC).
Where does AI fit in the mining value chain?
Mining produces data at every step: geophysical surveys, drill core, blast-hole assays, truck telemetry, plant historians, lab results and decades of reports. AI is useful where that data supports a frequent decision. The table summarises the main uses covered in this guide.
| Stage | Where AI is used | Data it needs | Published example |
|---|---|---|---|
| Exploration | Prospectivity mapping, drill core logging | Geophysics, geochemistry, geological maps, core spectra | Gradient boosting prospectivity models for zinc-lead deposits (Lawley et al., 2022) |
| Grade control | Ore and waste classification at the face, reconciliation with the plan | Blast-hole assays, sensor readings, mine plan | XRF sensors in the shovel bucket (Haest et al.) |
| Mining and haulage | Autonomous haulage, dispatch, predictive maintenance | GPS, payload, engine and hydraulic data, work orders | Autonomous haul trucks (Komatsu) |
| Processing | Soft sensors, froth imaging, setpoint optimisation | Historian data, lab assays, analyser readings, camera images | Machine vision in flotation (Aldrich et al., 2010) |
| Across the site | Search and question answering over procedures, reports and maintenance history | Documents in Arabic, French and English | See our RAG guide for maintenance manuals |
A review of AI in mineral processing names declining ore grades and demand for ethical, low-impact mining among the reasons the industry is looking at AI (Mishra, 2021). Lower grades mean more rock moved and milled for each tonne of metal, so small gains in each step add up.
How is AI used in mineral exploration?
Prospectivity mapping. A prospectivity model combines layers such as gravity, magnetics, geology and known deposits, and scores each cell of a map by how likely it is to host a deposit type. In a study across Canada, the United States and Australia, co-authored by USGS scientists, baseline weights-of-evidence models gave relatively poor results on an independent test set. The best gradient boosting models reached an area under the curve (AUC) of 0.983 for Mississippi Valley-type and 0.991 for clastic-dominated zinc-lead deposits, and reduced the search space by more than 94% (Lawley et al., 2022). AUC measures how well a model ranks known deposits above barren ground; 1.0 is perfect. A smaller search area means fewer square kilometres to cover with field work, not a guaranteed discovery.
Core logging. Spectral scanners turn drill core into consistent digital data. CSIRO's HyLogger uses visible and infrared light to characterise selected minerals from drill cores, chips and pulps, and is largely automated, driven by a robotic sampling system. Seven HyLogging machines are in use by Australian state and territory geological surveys (CSIRO). Data of this kind is what machine learning needs: the same measurement, made the same way, hole after hole.
Old reports and maps. Much exploration knowledge sits in scanned reports, logs and maps from past campaigns. Digitising them comes first; our guide to OCR for scanned technical documents covers that step.
Our article on AI-powered geological analysis goes deeper into exploration and geological data.
The geologist still signs. Under the JORC Code, any public report of exploration results, mineral resources or ore reserves "must be based on and fairly reflect documentation prepared by a Competent Person", who must have at least five years' experience with the relevant style of mineralisation or type of deposit (JORC). A model's output is one input to that person's work.
How does AI help grade control at the mine face?
Grade control decides, truck by truck, whether material goes to the mill, a stockpile or the waste dump. Errors go both ways: ore sent to waste is lost, and waste sent to the mill dilutes the feed.
Sensors at the face are changing the unit of decision. MineSense's ShovelSense puts X-ray fluorescence (XRF) sensors in the brow of the shovel bucket and links them to the fleet management system, so a truck can be redirected automatically when the measured grade gives a different classification from the mine plan. Measuring each bucket reduces the selective mining unit from a mining block (for example 1,500 m³) to a single bucket (for example 45 m³ or less) (Haest et al., AusIMM).
According to the Canadian Institute of Mining, Metallurgy and Petroleum (CIM), across nine open-pit copper mines over part of 2023, each system diverted on average 5.9% of measured trucks to waste that were otherwise designated as ore, and 7.2% to ore that were otherwise designated as waste. Diversions vary with the contrast in the ore body (CIM). These are vendor-reported figures for copper; results at another deposit will differ.
Grade prediction from drilling data, geology and past reconciliation is the other half of grade control. Our guide to ore grade prediction and grade control covers the models, the data and how to validate them.
Where does AI help in drilling, hauling and maintenance?
Autonomous haulage. Komatsu says it was first to market with a commercial autonomous mining solution in 2008. In April 2026 it commissioned its 1,000th autonomous ultra-class haul truck, and its customers have collectively moved over 11.5 billion metric tons of material with its FrontRunner system (Komatsu). Autonomy is usually bought from the equipment maker as a complete system, with dispatch and mine planning around it, rather than built by the mine.
Predictive maintenance. Haul trucks, shovels, crushers and mills generate telemetry, oil analysis and work orders. Models that flag abnormal behaviour early let planners schedule repairs before failures. Labelled failures are usually scarce, so most projects begin with anomaly detection; see our comparison of anomaly detection methods for industrial data.
Maintenance knowledge. Technicians at a remote site need manuals, procedures and the history of similar failures. An assistant that searches these documents in the languages the site uses saves time on every job, provided it runs locally.
How is AI used in mineral processing?
The concentrator is where much of the energy goes. A report commissioned by the Weir Group, which analysed data from more than 40 published studies, found that comminution (crushing and grinding) typically accounts for 25% of mining's final energy consumption (AusIMM).
Soft sensors. Grind size, concentrate grade and recovery are often known only from periodic samples or analysers. A soft sensor estimates them continuously from process measurements, so operators and control loops react sooner. Our guide to soft sensors explains how to build and validate one, including a flotation example.
Froth imaging. Cameras above flotation cells extract physical features such as bubble size and dynamic features such as froth velocity. Research has continued since the late 1980s and commercial froth imaging systems exist, but a 2010 review found that a long-term, fully automated control system based on machine vision was "yet to materialise" (Aldrich et al., 2010). In practice, froth cameras are used mainly as measurements for operators and control loops.
Setpoint and reagent optimisation. With enough history, models relate ore properties, reagent dosages and operating settings to recovery and grade, and suggest settings to test. Changes should go through trials with the metallurgists, not straight into the control system.
What is the Algerian mining context?
The USGS 2019 Minerals Yearbook chapter on Algeria gives a picture of the main deposits (USGS, 2019). The figures below are those reported for 2019 and may have changed since.
| Commodity | Deposit or mine | What the USGS reported |
|---|---|---|
| Iron ore | Gara Djebilet (southwest) | 1,540 Mt grading 56% iron |
| Iron ore | Mecheri Abdelaziz (east of Gara Djebilet) | 702 Mt grading 52% iron |
| Iron ore | Ouenza and Boukhadra (Tébessa) | 80.3 Mt at 59.5% iron and 47.1 Mt at 48% iron |
| Phosphate | Djebel Onk (Tébessa), SOMIPHOS | Output of 1.3 Mt in 2019; national resources estimated at 2.2 Gt |
| Zinc and lead | Tala Hamza, Oued Amizour permit near Béjaïa | 68.6 Mt grading 4.6% zinc and 1.2% lead |
Three points matter for AI. First, some sites are remote: Gara Djebilet lies in southwestern Algeria near the border with Mauritania, so systems there must work on site; our guide to running AI at remote sites with poor connectivity covers the design. Second, geological and production data is commercially and strategically sensitive, which argues for keeping it on infrastructure the operator controls. Third, the legal framework has changed: Law No. 25-12 of 3 August 2025 on mining activities repealed and replaced Law No. 14-05 of 24 February 2014 (King & Spalding). Confirm with counsel what the new law and its implementing texts require for geological data, reporting and data held by contractors before you design an AI project around them.
Which AI use cases should a mine start with?
- List the frequent decisions. Truck destinations, maintenance priorities, mill and flotation setpoints, drill targets. Note how often each is made and what an error costs.
- Check the data behind each one. Are assays linked to locations and times? Are failures recorded in work orders? Is the plant historian complete? An AI readiness assessment structures this check.
- Pick one use case with frequent decisions, usable data and an owner on site who wants it.
- Run in parallel first. Compare model recommendations with current practice for weeks, using reconciliation, lab results or failure records as the judge.
- Decide where it runs. For remote pits and sensitive geological data, plan for local servers from the start.
- Hand over with an owner. Someone on site must review the model's performance, report drift and decide when it is retrained.
What we have seen at KABAS AI
KABAS AI has not published a mining project, so we cannot share mining results. What we can describe is how our products are designed for the constraints in this guide.
DALILE deploys fully on-premise and works without an internet connection. On our mining solutions page it is positioned to connect production data, equipment records and safety documentation so that engineers can query them in natural language at a remote site. Virtual Lab lets teams test process parameters virtually before running trials, which fits the cautious approach to setpoint changes described above.
Our practical advice is the same for every mine: start with a decision that matters, prove the model in parallel with current practice, and keep the data and the models on infrastructure you control. If you are planning AI for a mine or a processing plant, our consulting team can help you choose the first use case and check the data. You can also contact us directly.
Sources
- Lawley et al., Data-driven prospectivity modelling of sediment-hosted Zn-Pb mineral systems and their critical raw materials, Ore Geology Reviews 141, 2022 (USGS record)
- CSIRO, HyLogging
- JORC, Competent Persons
- Haest et al., ShovelSense: measuring grade at bucket resolution, AusIMM International Mining Geology Conference 2022, abstract
- CIM, Optimizing the mine-to-mill pipeline with data (MineSense spotlight), 2024
- Komatsu, Komatsu becomes first OEM to commission 1,000 ultra-class autonomous haul trucks, 22 April 2026
- AusIMM Bulletin, Recent report identifies major carbon reduction opportunities in global mining, 2021
- Aldrich, Marais, Shean and Cilliers, Online monitoring and control of froth flotation systems with machine vision: A review, International Journal of Mineral Processing 96, 2010
- Mishra, AI4R2R (AI for Rock to Revenue): A Review of the Applications of AI in Mineral Processing, Minerals 11, 2021
- USGS, The Mineral Industry of Algeria, 2019 Minerals Yearbook
- King & Spalding, Algeria Reshapes Mining Regime: New Law Signals Fresh Opportunities, 15 September 2025
Frequently asked questions
Where should a mine start with AI?
Start with a decision that is made often, costs money when it is wrong, and already has data behind it, such as ore and waste classification, a recurring equipment failure or a quality variable in the concentrator. Check the data first, run the model alongside the current practice, and compare results before anyone relies on it.
Does AI replace the geologist or the Competent Person?
No. A model can rank targets or estimate grades, but under the JORC Code any public report of exploration results, mineral resources or ore reserves must be based on documentation prepared by a Competent Person. Other reporting codes have similar rules, so AI outputs remain inputs to a qualified person's judgement.
Are autonomous haul trucks in commercial use?
Yes. Komatsu says it was first to market with a commercial autonomous mining solution in 2008, and in April 2026 it commissioned its 1,000th autonomous ultra-class haul truck. Its customers have moved over 11.5 billion metric tons of material with its FrontRunner system.
Can AI work at a remote mine without an internet connection?
Yes, if the models, the data they need and the user interface run on servers at the site. The link is then used only to synchronise data and receive updates. Plan for hardware, power, cooling and model updates at the site before choosing this design.
Why is flotation a common target for machine vision?
The appearance of the froth reflects how the cell is performing, and a camera can measure features such as bubble size and froth velocity continuously. Research on froth imaging has continued since the late 1980s and commercial systems exist, but a 2010 review found that long-term, fully automated control based on machine vision had yet to materialise.



